Tin Powders
MMP Tin Powders are available in multiple grades, each characterized according to, for example, particle size, specific surface area, and apparent density. Tin powder grades are manufactured by a air-atomizing process in our modern, purpose-built facility.
Material properties are engineered by careful control of processing parameters, allowing us to offer tailored solutions to our customers’ requirements.
Tin Powder are characterized by using only high purity certified ingots, which result in a nodular or spheroidal morphology with Particle Sizes available from 20 – 200 Microns. Properties and, therefore uses vary with particle shape, size, specific surface area, and purity. Tin powders find applications in diverse markets and technologies.
Tin Powder is available in a variety of UN-approved packaging options, including 25kg sacks, 25-250kg steel drums
Applications
Tin Powders are used in very many applications, markets and technologies by virtue of the wide range of physical and chemical properties available.
Typical applications include pressed and sintered components, bearings and bushes, friction components, metallurgical alloying, decorative and architectural finishes, welding and brazing, diamond tooling, radiation shielding, surface engineering, electronics.
Technical Specifications
For indicative technical specifications, please refer to the table below – and for more information about any Tin Powder requirement that you may have, please contact us!
|
PRODUCT GROUP
|
CHEMICAL COMPOSITION
|
APPARENT DENSITY
|
PARTICLE SIZE
|
|---|---|---|---|
|
Tin Powder
|
Sn>99.7%
|
3.8–4.4g/cc
|
<200µm
<150µm <75µm <53µm <45µm <25µm |