Press-Ready Premix Bronze Powder
MMP Press-Ready Premix Bronze Powders are available in a range of powders with low growth (negative dimensional change) to high growth (positive dimensional change), each characterized according to, for example, dimensional change, apparent density, green strength, and chemistry. Premix Powders are manufactured by a water-atomizing process in our modern, purpose-built facility.
Material properties are engineered by careful control of processing parameters, allowing us to offer tailored solutions to our customers’ requirements.
By pre-selecting and blending an array of tightly controlled pre-blends, Press-Ready Premix Powders can be engineered to provide properties, characteristics and designs for the most demanding of needs.
Press-ready Premix Powder is available in a variety of UN-approved packaging options, including 25kg sacks, 25-250kg steel drums and 250-1,000kg bulk bags.
Applications
Press-ready Premix Bronze Powders are used in very many applications, markets and technologies by virtue of the wide range of physical and chemical properties available.
Typical applications include pressed and sintered components, bearings and bushes, as well as a number of niche applications.
Technical Specifications
For indicative technical specifications, please refer to the table below – and for more information about any Premix Bronze Powder requirement that you may have, please contact us!
|
PRODUCT GROUP
|
CHEMICAL COMPOSITION
|
APPARENT DENSITY
|
DIMENSIONAL CHANGE
|
|---|---|---|---|
|
Low Shrinkage / Dimensional Change
|
Cu90/Sn10
|
2.0–3.5g/cc
|
-2.0 to 0.0%
|
|
'Zero’ Dimensional Change
|
Cu90/Sn10
|
2.5–3.5g/cc
|
-0.3 to 0.3%
|
|
High Growth / Dimensional Change
|
Cu90/Sn10
|
2.5–3.5g/cc
|
0.0 to 2.0%
|