Spherical Bronze Powders
MMP Spherical Bronze Powders (SBP) are available in multiple grades, each characterized according to, for example, particle size, specific surface area, apparent density and chemistry. SBP grades are manufactured by a air-atomizing process in our modern, purpose-built facility.
Material properties are engineered by careful control of processing parameters, allowing us to offer tailored solutions to our customers’ requirements.
Spherical Bronze Powders are available with particle sizes ranging from less than 45 microns to more than 1mm, with good sphericity, low oxygen and lead (Pb) content, and excellent particle size distribution. A full range of very narrow sieve fractions specifically for filter applications is also available.
SBP is available in a variety of UN-approved packaging options, including 25kg sacks, 25-250kg steel drums and 250-1,000kg bulk bags.
Applications
Spherical Bronze Powders are used in very many applications, markets and technologies by virtue of the wide range of physical and chemical properties available.



Typical applications include filters, steel backed bearings, additive manufacturing, resin bonded friction components, bronze filled PTFE for hydraulic seals, decorative and architectural finishes.
Technical Specifications
For indicative technical specifications, please refer to the table below – and for more information about any Spherical Bronze Powder requirement that you may have, please contact us!
PRODUCT GROUP
|
CHEMICAL COMPOSITION
|
APPARENT DENSITY
|
PARTICLE SIZE
|
---|---|---|---|
Spherical Bronze Powder
|
Sn5-40%
|
4.5–5.5g/cc
|
<1,000µm
<500µm <150µm <45µm |